Mounting The Switch On A Desktop; Connecting The Power Cords And The Ground Wire; Connecting The Ac Power Cord - 3Com 4500G Getting Started Manual

Mounting the
Switch on a
Desktop
Connecting the
Power Cords and
the Ground Wire
Connecting the AC
Power Cord
Figure 14 Installation completed 2
Rear bracket Rear bracket
Screw 1: Fix the rear bracket to the mount angle.
In many cases, standard 19-inch racks are not available. Therefore, switches
are often placed on a desktop. To place your switch on a desktop, you
simply need to:
Make sure that the surface is clean, flat, and sturdy.
■
Makes sure that the environment is well ventilated and allow 10 cm
■
(3.9 in.) of space around the chassis for heat dissipation.
Do not place heavy objects on your switch.
■
When stacking, the vertical distance between two switches must be at
■
least 1.5 cm (0.59 in).
AC power source socket (recommended)
Use a single-phase three-wire power socket with a neutral contact or a
general purpose PC power socket, making sure that the neutral point is
well connected to building ground. Verify that the power source of the
build is reliably grounded.

Mounting the Switch on a Desktop

Screw 2 Screw 2
Screw 2 is mounted to the switch.
29
Screw 1 Screw 1
Rear mount angle Rear mount angle