Ftp - 3Com 4500G Getting Started Manual

FTP

To upgrade software to your switch using FTP, do the following:
1 From the Boot Menu, select option 1 (Download application file to flash) to
display the following:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
2 Select option 2 to display the following:
Load File name:
Switch IP address:
Server IP address:
FTP User Name:
FTP User Password:
3 Enter the file name, switch IP address, Server IP address and FTP user name
and password to display the following:
Are you sure to download file to flash? Yes or No(Y/N)
4 Enter y and the following information is displayed to indicate the file is
downloading:
Loading.....done
Free flash Space: 10456064 bytes
Writing flash....done!
Please input the file attribute (main/backup/none):none
done!
5 Repeat step 1 to step 4 for each of the remaining files.
Upgrading from the Bootrom Interface 73