When Setting An Original On The Original Glass - Konica Minolta bizhub 225i User Manual

7.1 How to scan originals
7.1.2

When setting an original on the Original Glass

1
Set the original onto the Original Glass.
% For details on how to set the original, refer to [User's Guide Copy].
2
Connect a USB memory to this machine.
The machine mode changes to scan mode and [TO: Scan To USB Memory] is displayed.
% By pressing the , key, file format, and compression coding method can be set. For details, refer to
page 7-7.
3
Press the Start key.
4
Use the +/, key to select [AUTO DETECTION] or [MANUAL].
% If [AUTO DETECTION] is selected, press the OK key and go to Step 8.
% If [MANUAL] is selected, scanning size can be selected. Press the ) key and go to Step 6.
5
Use the +/, key to select desired scanning size, then press the OK key.
% By pressing [INCH] or [METRIC], the scanning size unit can be changed.
6
Press the OK key.
bizhub 225i
7
7-5