[Unit]; [Help]; [Scanning Mode]; [Duplex Scanning] - Konica Minolta bizhub 225i User Manual

3

[Unit]

Select a display unit from the drop-down list.

[Help]

The Help screen appears.

[Scanning mode]

[Brightness/Contrast]
- Pressing
- The initial setting is [0%].
-
Brightness can be set between -100% (dark) and +100% (bright). Contrast can be set between -100%
to +100%.
[Sharp]
-
Pressing
- The initial setting is [0].
- Brightness can be set between -2 and +3.
[Curves]
-
Pressing
-
The initial setting is [0].
- Curves can be set between -100 and +100.
[Levels]
- Pressing
-
The initial settings are; minimum entry value: [0], maximum entry value: [255], gamma value: [1.00], min-
imum output value: [0], and maximum output value: [255].
-
The following setting ranges apply; for minimum entry value: between 0 and 247, for maximum entry
value: between 8 and 255, for gamma value: between 0.10 and 9.99, for minimum output value: be-
tween 0 and 247, for maximum output value: between 8 and 255. (The smallest difference between a
maximum and a minimum value cannot be lower than 8).
[Color Balance]
-
Pressing
-
The initial setting is [0].
- Color balance can be set between -100 and +100.
[Hue/Saturation]
-
Pressing
-
The initial setting is [0].
-
Hue can be set between -180 and +180, while saturation and brightness can be set between -100 and
+100.
[Default]
- Press [Default] to return the setting to the default value.

[Duplex Scanning]

Duplex Scanning is indicated if optional ADF is installed. This function selects ON-OFF for duplex (double
face printing).
3-6
displays a screen that enables brightness and color contrast to be adjusted.
displays a screen that enables color sharpness to be adjusted.
displays a screen that enables the curve of colors to be adjusted.
displays a screen that enables color levels to be adjusted.
displays a screen that enables color balance to be adjusted.
displays a screen that enables hue, saturation, and brightness to be adjusted.
TWAIN driver 3.2
bizhub 225i