Memory Button; Memory Indicator - Roland BOSS OD-200 Owner's Manual

Parameter Explanation
[LOW] [MIDDLE]
Adjust the tonal character of the main
[HIGH] knobs
distortion.
When STRUCTURE is PARALLEL
The booster and main distortion are placed in parallel.
[LOW]
Booster
Guitar [MIDDLE]
Main
[HIGH]
distortion
Parameter
PRE
BOOST
(BOOSTER PRE GAIN)
POST
BOOST
(BOOSTER POST GAIN)
[LOW] [MIDDLE]
[HIGH] knobs
Preventing accidental operation (panel lock)
By long-pressing the [PARAM] button, you can switch
between enabling (unlocking) or disabling (locking)
operation of the knobs and buttons.
If you attempt an operation while the unit is locked, the
"LCK."
display indicates
Gate Amp
Explanation
Adjusts the booster gain.
Depending on the type, the sound
will distort.
Adjusts the volume of the booster.
Adjust the tonal character of the
main distortion and the booster as
a whole.
10
BOOST/GATE indicator
Indicates the parameter that can be adjusted by the
[PARAM] knob.
When the indicator is unlit, the knob selects memories.
Memory
MANUAL = "MAN", memory 1–9
10–99 = "M10"–"Mgg", memory 100–127
11
[MEMORY] button
Switches or saves memories (MANUAL, 1–127) (p. 8).
The memory is switched each time you press the
[MEMORY] button. You can also switch memories by
holding down the [MEMORY] button and turning the
[PARAM] knob.
12

MEMORY indicator

Indicates the currently selected memory.
If a memory 5–127 is selected, the indicator is unlit.
13
[ON/OFF] switch
Turns the effect on/off.
Panel Descriptions
= "M-1"–"M-g", memory
= "M.00"–"M.27"
5