Structure - Huawei NE40E-X1 Hardware Description

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

4.8.2 Structure

The 16xE1 cable uses the Anea 96 connector on one end, as shown in
Figure 4-7 Appearance of the 16×E1 cable
Figure 4-8
Figure 4-8 Structure of the 16×E1 cable
l
Issue 02 (2011-09-10)
shows the structure of the 16xE1 cable.
75-ohm 16×E1 cable wiring
Table 4-17 describes the wiring of the 75-ohm 16xE1 cable. In the table, Tip indicates the
anode and Ring indicates the cathode, and the pairs are numbered from 1 to 32.
Table 4-17 75-ohm 16×E1 cable wiring
Pin Cable
Wire Pair
No.
1 Tip 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Remar Pin Cable
ks
Wire
R0 25 Tip
4 Cables
Figure 4-7.
Remar
ks
Pair
No.
2 T0
86