Interface Attributes Of 100Base-Tx/1000Base-T-Rj45; Interface Attributes Of 1000Base-X-Sfp - Huawei NE40E-X1 Hardware Description

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description
C.1 Interface Attributes of 100Base-TX/1000Base-T-RJ45
Table C-1
Table C-1 Interface attributes of the 100Base-TX/1000Base-T-RJ45
Attributes
Connector type
Working mode
Cable specification
Frame format
Network protocol
C.2 Interface Attributes of 1000Base-X-SFP
Table C-2
Table C-2 Interface attributes of the 1000Base-X-SFP
Attributes
Connector type
Interface attributes
Working mode
Compliant standard
Frame format
Network protocol
Table C-3 Attributes of 1000M SFP optical modules
Attributes
Transmission
distance
Issue 02 (2011-09-10)
lists the interface attributes of 100Base-TX/1000Base-T-RJ45.
Description
RJ45
100M/1000M auto-sensing and half-duplex and full-duplex
When the interface rate is 1000 Mbit/s, Category 5 unshielded
twisted pair (UTP) cable is recommended. When the interface rate
is 1000 Mbit/s, Super category 5 Shielded Twisted Pair (STP) cable
is recommended.
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
lists the interface attributes of 1000Base-X-SFP.
Description
LC/PC
Compliant with the selected SFP optical module. (For the attributes
of SFP modules, see
Full-duplex
IEEE 802.3-2002
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.55 km 10 km
(0.31 mi) (6.21 mi)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
C List of Interface Attributes
Table C-3 and Table C-4.)
40 km 40 km
(24.86 (24.86
mi) mi)
80 km 100 km
(49.71 (62.14
mi) mi)
106