Indicators On The Ne40E-X2; Indicators On A Fan Module - Huawei NE40E-X1 Hardware Description

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description
Table A-5 Description of the buttons and indicators on a flexible card
Indicator/
Button
STAT indicator
LINK/ACT
LOS1/LOS2
A.2 Indicators on the NE40E-X2
This section describes the indicators on the NE40E-X2.
A.2.1 Indicators on a Fan Module
Table A-6
Issue 02 (2011-09-10)
Status
Green
Yellow
Red
Green
Green
Red
describes the indicators on a fan module.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
If the indicator is steady green, it indicates that
the flexible card works normally.
If the indicator is off, it indicates that the
flexible card is not powered on or fails to be
registered.
If the indicator is steady yellow, it indicates
that the FPIC is installed in a slot for a HIC
and an alarm is reported or the FPIC is not
loaded with the logic.
If the indicator is steady red, it indicates that
the hardware of the flexible card is faulty.
If the indicator is steady green, it indicates that
the link is Up.
If the indicator blinks green, it indicates that
data is being transmitted.
If the indicator is off, it indicates that the link
is Down.
If the indicator is steady green, it indicates that
optical signals are normal.
If the indicator is off, it indicates that the
optical module is not installed.
If the indicator is steady red, it indicates that
optical signals are lost.
A List of Indicators
97