Switching Display For Tuner - Kenwood KRC-V879R Instruction Manual

Switching Display for Tuner

You can change the display used when listening to the radio.
Switching the Display:
Each time you press the DISP button, the display changes as
follows:
Programme Service name (only during RDS station reception)/
Station frequency
Radio text (only during RDS station reception)
Displaying Frequencies during programme service name
display:
Hold down the DISP button for one second or more.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
NOTE
If the RDS station currently tuned to is transmitting no text whilst
the Radio Text Display mode is turned on, "NO TEXT" will appear
in the display. Whilst awaiting reception, "Waiting" will be
displayed.
2WARNING
To prevent accidents, drivers should not look at the display whilst
driving.
RDS features
LOUD B NR SCAN
KRC-V879R
PTY indicator
KRC-779R
PTY indicator
— 15 —
TI/
PTY
VOL ADJ
PROG PROG PWR OFF
/PTY
AUD
B.S/RDM REP MTL/M.RDM T I DISP
VOL ADJ NAME.S
4
# 1-6 DISP AM
TI indicator
TI indicator
FM
ANG
¢