Audio Control Features; Audio Control Setting - Kenwood KRC-V879R Instruction Manual

Audio control features

LOUD B NR SCAN B.S/RDM
KRC-V879R
Selecting mode
KRC-779R
Selecting mode
AUD
PROG PROG PWR OFF
/PTY
AUD
REP MTL/M.RDM T I DISP
VOL ADJ NAME.S
4 ¢
AM
Setting value
Setting value

Audio Control Setting

FM
Adjust various parameters of sound quality.
1
Hold down the AUD button for one second or more to enter
the control mode.
2
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
ANG
change.
Please refer to the following for the contents of the
adjustment modes.
NOTE
Source tone memory
Each source (tape, CD, FM, AM, and disc changer) has its own
memory in which to store the bass, middle, and treble tone
settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode
uses the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Please refer to the following for the adjusting values.
4
Press the AUD button to end the control mode.
NOTE
• Determining the parameters in the audio control setting will
clear all the adjustments made in the System Q and they are
replaced with the values made in the audio control setting.
• The following parameters can be set when the System Q
function on the menu settings is ON.
Bass centre frequency, bass quality factor, bass extend, middle
centre frequency, middle quality factor, and treble centre
frequency.
— 11 —