Blank Skip; Music Repeat; Switching Display For Cassette Tapes - Kenwood KRC-V879R Instruction Manual

Cassette player features

Blank Skip

Automatically fast forwards to the beginning of the next track
when long blank spaces (10 seconds or more) are detected,
continuing tape playback. This function is on, when unit is first
powered on.
Turning Blank Skip Function On/Off:
Press the B.S button to switch the blank skip function on and
off.
"Blank Skip ON"/"B.Skip ON" is displayed when the blank skip
function is turned on.
NOTE
• If the blank space contains hiss noise, the blank skip function
may not work correctly.
• Sections recorded at low levels may trigger the blank skip
function if they last for 10 seconds or more.

Music Repeat

Repeatedly plays the current track.
Turning Music Repeat Function On/Off:
Press the REP button to switch the music repeat function on
and off.
"Repeat ON" is displayed when music repeat is turned on.
Cancelling Music Repeat Function:
Press either the REP or 38 button.
NOTE
The music repeat function "knows" where a track begins by
detecting the blank space preceding it (i.e., the space between
tracks). However, when the blank space lasts for less than 4
seconds or contains noise, this function may not operate
correctly. Furthermore, sections recorded at low levels may
trigger the function if they last for 4 seconds or more.

Switching Display for Cassette Tapes

Switch the display that appears whilst tapes are playing.
Switching the Tape display:
Each time you press the DISP button, the display during tape
play switches as follows:
Play side + Tape counter
Play side + Tape running
Play side
NOTE
The tape counter is not exact, but only represents an
approximation of the elapsed time.
— 22 —