Advertisement
Step by step assembly instructions
Step Twelve (only for base unit)
To prevent possible overbalancing we recommend that this unit is secured to a suitable wall by use of two 'L'
Brackets (P) fitted to the top side of the unit.
1.
Attach the 2x brackets (P) onto the top side of the unit using 4x euroscrew (O).
2.
Pre-fix brackets (P) to wall, Wall plug and screw not included.
3,4.
Adjust position using (P1), then attach it.
5.
Insert cap (P2)
Take care when drilling the wall that you do not drill into any pipes, wires etc. If in doubt, consult an expert.
P
1
P
3
Wall plug and screw not included. See wall fixing guide at page 12.
2
O
Wall plug and screw not included. Please see Guide to wall mounting.
4
P1
! IMPORTANT !
P
Spacer (N) are to be used on both wall and base units to
allow for the depth of skirting boards, allowing all of the
units to sit flush with one another.
N
5
P
P2
Page 9
MXT 70 rev. 03 - 26/02/20
Advertisement
