Step by step assembly instructions
Step Three
1.
Attach 8x wedgefix housing (D) into the pre-drilled holes on shelves (3) as shown.
Step Four
1.
Place 4x long cam lock (BI) into the holes on divider (5) as shown, arrow pointing towards the bolt.
Ensure long cam lock (BI) is pusched down firmly to base of drill hole.
2.
Attach 4x wooden dowels (C) into the pre-drilled holes on divider (5) as shown.
3.
Attach 4x wedgefix dowels (E) into the holes on divider (5) as shown.
E
3
x 2
D
5
D
E
BI
5
C
D
BI
C
BI
Page 5
MXT 70 rev. 03 - 26/02/20