John Lewis Morgan Office Chair Manual
  1. Manuals
  2. Brands
  3. John Lewis Manuals
  4. Indoor Furnishing
  5. Morgan Office Chair
  6. Manual

John Lewis Morgan Office Chair Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
John Lewis
Morgan Office Chair
Stock number: 816/31276 & 816/31279
Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of parts is
given in this leaflet. If any parts are missing, broken, damaged, or worn, stop using this product until
repairs are made and factory replacement parts are installed. You may obtain replacement parts by
calling 0-800-051-6775 (UK).
Please note that a receipt is required for all warranty replacements. Service hours are: UK Standard
Time: 2:00 pm-1:00 am Monday – Friday.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 20 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.
1

Advertisement

Table of Contents
loading

Related Manuals for John Lewis Morgan Office Chair

Summary of Contents for John Lewis Morgan Office Chair

  • Page 1 John Lewis Morgan Office Chair Stock number: 816/31276 & 816/31279 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product.
  • Page 2 Fittings and parts checklist Back Cushion Gas Lift with gas lift cover x 1 Seat Cushion 1-1/4” Screws x 1” Screws Seat Plate x1 5/8” Screws Arm x 2 Base x 1 Allen Key x 1 Casters x 5...
  • Page 3 Step by step assembly instructions Step One 1. Turn the base (E) upside down on a protective surface, press the casters (F) into the holes at the end of each leg. ______________________________________________________________ Step Two 1. Turn the base (E) upright and insert the gas lift (G) into the center hole of the base (E), the gas lift cover should be in place over gas lift (G).
  • Page 4 ____________________________________________________________ Step Three 1. Place the seat plate (C) on the bottom of seat cushion (B), align the seat plate so the FRONT on the seat plate (C) matches the FRONT label on the bottom of seat cushion (B), insert the 1-1/4” screws (H) into the front holes of seat plate (C) and 1”...
  • Page 5 ______________________________________________________________ Step Five 1. Take off the knobs from the arm brackets (D) first, then insert the arm bracket (D) into the sockets on the bottom of seat cushion (B), tighten by using the knobs. _________________________________________________________ Step Six 1. Place the assembled chair on top of gas lift (G) and press down until fully engaged. The chair is now fully assembled.

  • Page 6: Chair Height Adjustment

    Operating instructions Chair Height Adjustment While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. To lower the seat, lift the handle while applying more weight downward on the seat.

  • Page 7: Arm Height Adjustment

    _______________________________________________________________ Tilt Lockout Operating While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all the way out (away from the gas lift) to allow the chair to tilt backwards. To lock the chair in the vertical position, sit upright and push the handle in towards the gas lift.

  • Page 8: Arm Width Adjustment

    Arm Width Adjustment 1. Reach for the knobs underneath the arms located on the bottom of seat cushion; turn the knobs clockwise to loose the width adjustment features then turn the knobs counter-clockwise to tighten when you have reached your desired width. Care and Maintenance This chair is intended to be used in the office or home.
  • Page 9 PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE ohn Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com...

Table of Contents