Advertisement
Quick Links
Mixit low wide unit
Stock Code: 80324203 - 80324103 - 80324003
Thank you for purchasing this Mixit low wide unit. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Drill
Spirit level
Screwdriver
Eye protection
Small hammer
Please check the pack contents before attempting to assemble this product. A full checklist of compo-
nents is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 60 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you are missing some fittings (cams, dowels and screws) please contact our spare parts
helpline on 0330 005 9435. Opening hours are 9am - 5pm Monday to Friday.
For all other queries, please call John Lewis Customer support on 0345 604 9049
Page 1
MXT 70 rev. 03 - 26/02/20
Advertisement
Related Manuals for John Lewis Mixit 80324203
Summary of Contents for John Lewis Mixit 80324203
- Page 1 Please check the pack contents before attempting to assemble this product. A full checklist of compo- nents is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
- Page 2 Fittings checklist Metal dowel x 12 Cam lock x 8 Long cam lock x 4 30mm Wedgefix housing x 8 Wedgefix dowel x 8 Wooden dowel x 12 25mm Nail x 30 Nail guide x 1 Levelling Wedge x 2 Support foot x 5 27mm Connector x 2 4MAx15 Connect.
-
Page 3: Parts Checklist
Parts checklist Page 3 MXT 70 rev. 03 - 26/02/20... - Page 4 Step by step assembly instructions Step One Attach 12x metal dowels (A) into the pre-drilled holes on top/bottom panels (1) as shown. Use a screwdriver to turn fitting (A) clockwise to fix. Step Two Place 8x cam lock (B) into the holes on side panels (4) as shown, arrow pointing towards the bolt. Attach 8x wooden dowels (C) into the pre-drilled holes on side panels (4) as shown.
- Page 5 Step by step assembly instructions Step Three Attach 8x wedgefix housing (D) into the pre-drilled holes on shelves (3) as shown. Step Four Place 4x long cam lock (BI) into the holes on divider (5) as shown, arrow pointing towards the bolt. Ensure long cam lock (BI) is pusched down firmly to base of drill hole.
- Page 6 Step by step assembly instructions Step Five Attach panels (5)(4) to top/bottom panels (1) as shown. Ensure metal dowels (A) and wooden dowels (C) are aligned correctly with the holes of matching parts before attaching. Secure panels using a screwdriver to turn fitting (B) clockwise to fix. Step Six Position back panel (2) as shown, back panel holes indicate upper part.
- Page 7 Step by step assembly instructions Step Seven Attach back panel (2) onto back side of the unit using 30x nails (F), with the help of the nail guide (G). Important: The cabinet MUST be ‘square’ when the back is attached. Step Eight (only for base unit) Attach support foot (L) onto bottom (1) using 30x screws (M).
- Page 8 Step by step assembly instructions Step Nine With help of an assistant, carefully stand up the unit upright. Step Ten (only for base unit) Use 2x levelling wedge (GI) to level the unit. Step Eleven Fittings have been supplied in order to join units together. Place units together in their final positon.
- Page 9 Step by step assembly instructions Step Twelve (only for base unit) To prevent possible overbalancing we recommend that this unit is secured to a suitable wall by use of two ‘L’ Brackets (P) fitted to the top side of the unit. Attach the 2x brackets (P) onto the top side of the unit using 4x euroscrew (O).
- Page 10 Step by step assembly instructions Step Thirteen (only for wall unit) To prevent possible overbalancing we recommend that this unit is secured to a suitable wall by use of two ‘L’ Brackets (P) fitted to the top side of the unit. Attach the 4x brackets (P) onto the top side of the unit using 8x euroscrew (O).
- Page 11 Step by step assembly instructions Step Fourteen Position the sheves (3) on the shelf support (E) as shown Page 11 MXT 70 rev. 03 - 26/02/20...
-
Page 12: Care And Maintenance
It must under no circumstances be used free-standing. No liability will be accepted for damage or injury caused by inadequate fixing or use without fixing. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street London SWIE 5NN www.johnlewis.com Page 12...