Table of Contents
Advertisement
Adjusting the Picture Quality
1
Press the SCRN button, the picture quality adjustment screen to be displayed.
2
Each time you press the SCRN button, the adjustment item can be selected.
3
Press the [ 2 ] or [ 3 ] button to adjust the value.
[BRIGHTNESS] (for Day time screen)
Press the [ 3 ] button for a brighter screen.
Press the [ 2 ] button for a darker screen.
[TINT]
Press the [ 3 ] button for a stronger green level.
Press the [ 2 ] button for a stronger red level.
[COLOR]
Press the [ 3 ] button for a deeper colour.
Press the [ 2 ] button for a paler colour.
[DIMMER] (for Night time screen)
Press the [ 3 ] button for a brighter screen.
Press the [ 2 ] button for a darker screen.
[CONTRAST]
Press the [ 3 ] button for stronger contrast.
Press the [ 2 ] button for less contrast.
[BLACK LEVEL]
Press the [ 3 ] button for less black level.
Press the [ 2 ] button for a stronger black level.
NOTE
• The [ TINT ] cannot be adjusted for the picture of PAL.
• [BRIGHTNESS] and [DIMMER] initial values are maximum.
• As regards [DIMMER] adjustment:
• When the condition is bright around the periphery of the monitor unit, the brightness does
not change even when [DIMMER] is adjusted.
• When set to maximum, even if the monitor unit periphery dims, there is no change in from
the brightness set with [BRIGHTNESS].
• There is no connection with the vehicle's illumination switch. (A sensor is installed facing the
front of monitor unit for light detection).
• If you make no key operation for 10 seconds, the picture quality adjustment screen is
automatically cancelled.
Setting the Remote Sensor On/Off
If this unit also runs when operating other units with different Kenwood remote
controls, its remote control function can be turned off.
1
Press the SCRN button for at least two seconds,
the function setup screen to be displayed.
2
Press the [ 2 ] or [ 3 ] button to switch the
function on [ON] and off [OFF].
3
Press the SCRN button to cancel the function
setup screen.
NOTE
If you make no key operation for 10 seconds, the
function setup screen is automatically cancelled.
SCREEN CONTROL
BRIGHTNESS
TINT
COLOR
DIMMER
CONTRAST
BLACK LEVEL
-
FUNCTION
REMOTE
OFF
3
3
ON
OFF
+
5
Advertisement
Table of Contents
