Adjusting The Picture Quality; Auto Dimmer - Kenwood LZ-702W Instruction Manual

Operations
Adjusting the Screen Control
You can adjust the picture quality and Auto
dimmer control of the monitor.
1
Enter the Screen Control mode
Press the [SCRN] button.
2

Adjusting the Picture Quality

Each time you touch the button, the setting
alternates between the settings shown in the
table below.
Item Touch Setting
"BRT" [3] Brighter screen
[2] Darker screen
"TIN" [3] Stronger red level
[2] Stronger green level
"COL" [3] Deeper color
[2] Paler color
"CONT" [3] Stronger contrast
[2] Less contrast
"BLK" [3] Less black level
[2] Stronger black level

Auto Dimmer

Item Touch Setting
"Auto DIM" [7On] When it gets dark, the brightness of
display lowers automatically.
[7Off] The display doesn't dim.
• The "BRT" can be adjusted when "Auto DIM" is set to
"Off".
• The "TIN" can be adjusted when NTSC video signal is
input.
• The "TIN" and "COL" cannot be adjusted for the
navigation picture (RGB) or the control screen.
3
Exit the Screen Control mode
Touch the [OK] button.
6
|
English
• Separate picture quality settings can be stored for the
video, control screens and navigation picture.
• The Screen Control is displayed only when you have
applied the parking brake.
• If you make no operation for 15 seconds, this mode is
automatically canceled.