Settings In "Step 7 Professional (Tia Portal)" In The "Web Server" Tab - Siemens CP 1626 Operating Instructions Manual

Operating hardware
4.3 Web server
4.3.3

Settings in "STEP 7 Professional (TIA Portal)" in the "Web server" tab.

Requirements
To be able to use the functionality of the Web server, make the following settings in "STEP 7
Professional (TIA Portal)":
● Enable the Web server
● Enable automatic updates (optional)
● Set the language for the Web server
Enable the Web server
As default the Web server is disabled. To enable the Web server, follow the steps below:
1. Select the CP 1626 in the network view.
2. In the "General" tab go to "Web server".
3. Select the "Activate web server on this module" check box
32
Operating Instructions, 11/2018, C79000-G8976-C434-03
CP 1626