Procedure For Installing The Cp 1626 - Siemens CP 1626 Operating Instructions Manual

2.2

Procedure for installing the CP 1626

Procedure for installing the CP 1626
Do not put any damaged parts into operation!
Only put undamaged parts into operation!
Note
Lightning protection
The requirements of EN61000-4-5, surge immunity tests on power supply lines, are met only
when a Blitzductor is used with 12 to 24 VDC:
Type: BVT AVD 24
Article number: 918 422
Vendor: DEHN+SÖHNE GmbH+Co.KG, Hans Dehn Straße. 1, Postfach 1640, D - 92306
Neumarkt, Germany
Recommendation for installation when using Linux
Install the CP 1626 first and then install the CP 1626 driver.
Requirements and conditions
● If available, enable the plug-and-play mechanism in the BIOS of your PC.
● The CP 1626 communications processor requires a PCIe slot with master capability.
Note
Note on the number of possible CP 1626s in one PG/PC
A maximum of 1 CP 1626 can be installed in one PG/PC.
CP 1626
Operating Instructions, 11/2018, C79000-G8976-C434-03
WARNING
Hardware installation
2.2 Procedure for installing the CP 1626
19