Language Settings; User Management - Siemens CP 1626 Operating Instructions Manual

Communications processor

Table of Contents

4.3.1

Language settings

Introduction

The Web server supports the following languages:

● German

● English

Requirements for displaying texts in various languages

To ensure that the Web server displays the various languages correctly, you need to set the

language for the Web server in the properties dialog of the CP 1626 in "STEP 7 Professional

(TIA Portal)".

Please refer to the information system in "STEP 7 Professional (TIA Portal)" for information

on the possibilities provided by the user administration.

The type of configuration determines which pages of the Web server you can access. The

following possibilities exist:

● You have activated the Web server and have not created any users other than the user

"Everybody" with minimal access rights. In this scenario, you only have access to the

intro and start page of the Web server after the configuration download.

Notice: A firmware update via the Web server is not possible in this case.

● You have activated the Web server and created an additional user with the access rights

"Perform firmware update" and "Query diagnostics". In this scenario, you have access to

all pages of the Web server after the configuration download.

● You have not activated the Web server. In this scenario, you have no access to the Web

server after the configuration download.

CP 1626

Operating Instructions, 11/2018, C79000-G8976-C434-03

Operating hardware

4.3 Web server

Table of Contents