Private Mib Of A Cp 1626 - Siemens CP 1626 Operating Instructions Manual

4.2.3

Private MIB of a CP 1626

Only variables for the LED status
The private MIB contains the following variables for the LED status:
Variable
snPCCP1626BFLedV
al
snPCCP1626SFLedV
al
snPCCP1626BFLed
snPCCP1626SFLed
Note
For the meaning of the LED signaling, refer to the section "Device description (Page 11)" of
the communications processor.
Object identifier (OID)
For the CP 1626
The private MIB variables of the CP 1626 have the following object identifier (OID):
1.3.6.1.4.1.4329.6.1.2.6.1.1
or
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).siemens(4329).automation
(6).automationProducts (1).automationSimaticNet (2).snPCCP
(6).snPCCP1626(1).snPCCP1626Report(1)
Restrictions
Downloading a PROFINET IO configuration to a CP 1626 starts the SNMP agent. During the
download, no SNMP diagnostics can therefore be performed. Afterwards the SNMP agent
starts up again automatically.
CP 1626
Operating Instructions, 11/2018, C79000-G8976-C434-03
Access rights Description of the variable
Read only Status of the bus fault LED
Read only Status of the system error
LED
Read only Status of the bus fault LED
Read only Status of the system error
LED
Operating hardware
4.2 Diagnostics with SNMP
Meaning of the values
Data type for all LED value
variables: Integer
Possible values are:
1: LED off
2: LED on
3: LED flashes
4: LED flashes fast
Data type for all LED variables:
DisplayString
Possible values are:
off: LED off
on: LED on
blink: LED flashes
fastBlink: LED flashes fast
29