Preparing The Camera - Bosch AUTODOME IP starlight 5000i Installation Manual

12 en | Preparing the Camera
5

Preparing the Camera

Note: For pendant models, use T15.
For in-ceiling models, use T10.
1.
2.
3.
4.
2021-01 | 1.3 |
Loosen the three (3) Hex screws in the trim ring / bubble enclosure with the appropriate
Torx screwdriver.
Remove the trim ring / bubble enclosure.
Remove the foam insert that protects the camera block.
Remove the tape holding the plastic lens protector; remove the lens protector.
1.
T15
3×
5.
2.
3.
4.
Installation Manual
AUTODOME IP starlight 5000i (pendant)
Bosch Security Systems