Attaching The Mounting Cap And The Camera - Bosch AUTODOME IP starlight 5000i Installation Manual

22 en | Installing a Pipe Mount and Camera
6.
7.
8.
9.
9.4

Attaching the Mounting Cap and the Camera

1.
2.
3.
4.
5.
6.
2021-01 | 1.3 |
Connect the mating connectors from the user-supplied cables from the pipe to the
matching connectors from the camera. Refer to the chapter Connection for more
information.
Place the top of the camera inside the mounting cap.
Rotate the camera approximately 15 degrees in a clockwise direction to lock firmly into
place.
Secure the safety locking screw with the T15 Torx screwdriver.
To ensure a watertight seal, wrap Teflon tape four times around the threads at the end of
the wall mount.
Attach the mounting cap to the wall mount.
Secure the locking screw with the T15 Torx screwdriver.
M4
T15
Thread all connection cables through the mounting cap.
Attach the hook at the end of the Safety Tether to the loop attached to the top of the
camera.
Connect the mating connectors on the user-supplied cables to the matching connectors
on the camera. Refer to the chapter Connection for more information.
Installation Manual
AUTODOME IP starlight 5000i (pendant)
Bosch Security Systems