Tsw1400 Example Setup Procedure; Select Dac348X Devices In The High Speed Converter Pro Gui Program; Load Dac Firmware Prompt - Texas Instruments DAC348 Series User Manual

www.ti.com
3.5

TSW1400 Example Setup Procedure

1. Start the High Speed Converter Pro GUI program. When the program starts, select the DAC tab and
then select the corresponding device in the "Select DAC" menu.
Figure 10. Select DAC348x Devices in the High Speed Converter Pro GUI Program
2. When prompted Load DAC Firmware?, select YES.
3. Click on the button labeled "Load File to transfer into TSW 1400", located near the top left of the GUI.
SLAU432 – February 2012
Submit Documentation Feedback
Figure 11. Load DAC Firmware Prompt
Copyright © 2012, Texas Instruments Incorporated
Basic Test Procedure with TSW1400
DAC348x EVM
13