Husky MR482478W5 Use And Care Manual page 6

Assembly (continued)
2
Assembling the bottom level
□ Assemble one brace (B) to two lower posts (C) skipping one
hole from the bottom of each post (C).
□ Place the rivets on the braces (B) into the posts (C), and tap
lightly to seat the rivets.
□ Repeat this with the other two lower posts (C) and braces
(B).
□ Assemble the beams (A) into the two posts and brace
assemblies.
□ Place a wire deck (D) on the ledge of the assembled beams
and braces with the fl at side facing upwards.
3
Assembling the next level
□ Connect another two braces (B) and two beams (A) to the
posts (C) for the next level.
□ Check that each beam (A) and brace (B) is spaced equally
(see chart).
□ Place a wire deck (D) on the ledge of the assembled beams
and braces with the fl at side of the wire deck upwards.
C
B
A
B
Shelf Position and Location
top (1)
intermediate top (2)
middle (3)
intermediate bottom (4)
bottom (5)
6
D
A
B
D
Recommended Holes Between
Levels
top hole
10 holes
10 holes (above coupling)
10 holes
1 hole from bottom