Assembly Options; Beam Orientation Options; Shelf Orientation Options - Husky MR482478W5 Use And Care Manual

Assembly Options

BEAM ORIENTATION OPTIONS

This unit can be assembled by positioning the beams and braces in one of two different orientations and combinations:
□ Beams and braces facing upwards
□ Beams and braces facing downwards
A rubber mallet should be used on the ledge of the beams and braces to properly seat the rivets.
Shelf Position (upwards)

SHELF ORIENTATION OPTIONS

Each shelf level can then be used as
Standard Flush Wire Deck placement
Recessed Tray Wire Deck placement
Combination Wire Deck placement
Beam side profile view
Tray Position (downwards)
4