Toro Groundsmaster 3400 Operator's Manual page 42

9. After towing the mower, return the mower to its
normal working condition by performing the following
procedure:
A. Chock the front wheels.
B. Close the bypass valve on the transmission pump
by turning it clockwise.
10. Engage the front wheel brakes as follows:
Note: Ensure that the M12 x 40 set screws are
removed and stored underneath the operator platform.
A. Identify the right, front wheel brake assembly.
B. Rotate the set screw counter-clockwise and
remove with washer.
C. Assemble the hex plug into the motor end plate
(Figure 48).
Figure 48
1. Front wheel motor
2. Hex plug
D. Identify the left front wheel-brake assembly and
repeat the previous procedure.
E. Remove the wheel chocks.
F. Disconnect the tow bar. The mower braking
system will now operate in the normal way.
1
2 3 4
g014451
3. Washer (M12)
4. Set screw (M12 x 40)
WARNING
Operating the machine without the brakes
functioning properly can cause personal injury or
death to you and others and damage to the machine
and property. Before using the mower, ensure that
the braking system is operating properly. -Check
the machine after servicing the brakes initially at
a slow speed. -Do not operate the machine if the
brakes are damaged or removed.
Before using the mower, ensure that the braking
system is operating properly.
• Check the machine after servicing the brakes
initially at a slow speed.
• Do not operate the machine if the brakes are
damaged or removed.
42