Toshiba 42L6200U User Manual page 170

170
Advanced features
Network Device Setup
Media Controller setup
You can limit which Media Controller can control this TV. If
Access Control is enabled, only those Media Controllers with a
check will be allowed to control the TV.
1 Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2 Press the ( /
Setup, and then press the OK button.
3 Press the ( /
Setup. Press the OK button.
4 Press the ( /
Press the ( /
5 Press the ( /
Press the OK button.
6 Press the ( /
Media Controller you want to accept.
7 Press the OK button. The box is selected. To clear the
selection, press the OK button.
8 Press the right arrow button to select Done. Press the OK
button.
NOTE
Maximum volume setup
This feature allows you to set the maximum volume of the TV
when it receives volume operation commands from a Media
Controller.
1 Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2 Press the ( /
Setup, and then press the OK button.
3 Press the ( /
Volume Setup.
arrow) buttons to select Media Renderer
arrow) buttons to select Media Controller
arrow) buttons to highlight Access Control.
arrow) buttons to select On.
arrow) buttons to select Media Controller.
arrow) buttons to select the MAC address of
❖
You can select up to 8 Media Controllers.
❖
If you would not like to limit the Media Controllers for this TV,
set Access Control to Off.
❖
Devices other than Media Controller may be displayed in the list.
❖
Confirm the MAC address of Media Controller and select it.
arrow) buttons to select Media Renderer
arrow) buttons to highlight Maximum