Factory Equipment Removal Process (continued)
7
Release the glove box compartment by pressing
both Right and Left side tabs towards each other.
9
Tilt the passenger seat towards the back to reveal
(4) connectors. Disconnect and remove the seat.
Installation
1
Connect the power cable to the Positive (+)
battery terminal at the fuse block in the engine
compartment and route the cable towards the
passenger side as shown below. Note: The
negative terminal should remain disconnected unit
the installation is completed.
8
Using a T50 Torx socket extract (4) Torx screws
from the passenger side seat.
2
Route the power cable thru the rubber grommet on
the firewall on the passenger side.
Honda Civic
5/11