Precautions; Accessory List; Installation; Caution Concerning The Installation Location - Alpine iLX-F903D Installation Manual

Precautions

• Be sure to disconnect the cable from the (–) battery post before
installing your unit. This will reduce any chance of damage to the
unit in case of a short-circuit.
• Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the unit to the fuse box, make sure the
fuse for the intended circuit of the unit has the appropriate
amperage. When in doubt, consult your Alpine dealer.
• The unit uses female RCA-type jacks for connection to other
units (e.g. amplifier) having RCA connectors. You may need an
adaptor to connect other units. If so, please contact your
authorized Alpine dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.

Accessory List

Main unit............................................................................................................. 1
Display unit ........................................................................................................ 1
Owner's Manual ......................................................................................... 1set
<Cables>
Power cable........................................................................................................ 1
GPS Antenna...................................................................................................... 1
Antenna mounting plate .............................................................................. 1
Cable clamp for antenna......................................................................... 1set
USB extension cable ....................................................................................... 1
PRE OUT cable................................................................................................... 1
Microphone ....................................................................................................... 1
CAN I/F cable..................................................................................................... 1
W.REMOTE cable .............................................................................................. 1
<Main unit mounting parts>
HDMI Bracket..................................................................................................... 1
Flush head screw (M5×8) .............................................................................. 4
Screw (M5×8) .................................................................................................... 4
<Display unit mounting parts>
POWER PLATE.................................................................................................... 1
Cover rear L ........................................................................................................ 1
Cover rear R........................................................................................................ 1
Flush head screw (M4×13) ....................................................................2(
Screw (M4×6) .............................................................................................7(
Screw (M3×4) .............................................................................................2(
Sheet cap .....................................................................................................4(*4)
• Amounts of Display unit mounting parts marked with * include
spare parts provided in case of loss. Store them safely.
*1 Number of spares for up-down adjustment of the Display.
*2 Includes 3 spares for fixing and adjusting the angle of the Display.
*3 Includes 1 spare for fixing the Cover middle.
*4 Includes 2 spares for blocking the display screen.

Installation

Mounting
Consult "Position Adjustment and Mounting Dimensions
of the Display" (page 18) in advance so that this unit does
not obstruct your field of vision or impair driving when
mounted.
Caution
• Do not block the unit's fan, thus preventing air
circulation. If blocked, heat will accumulate inside
the unit and may cause a fire.
<example>
Air ventilation hole
• When installing the display unit and main unit, do not
touch the connectors with your hands.
<Display unit>

Caution concerning the installation location

Angle of installation
Install at an angle between horizontal and 30°. Note that installing at
an angle outside of this range will result in a loss of performance and
possibly damage.
*
1)
*
2)
*
3)
Rear of the Unit
<Main unit>
Connectors
0 - 30°
3
-EN