Advertisement
Installation
1
Connect the power cable to the Positive(+) battery
terminal and route the cable down towards frame
of the vehicle. Note: The Negative(-) terminal
should remain disconnected until the installation
is completed.
3
Route the Positive(+) power cable through the
grommet under the carpet and pull the power cable
from under the vehicle. Note: seal the grommet
with silicone (not included) to prevent water from
entering the cabin.
~
,'
0
I
'
'
..
---'.::::::.::=:::::
I _,.--_..___,
5
Connect the power cable to the main harness.
~W¥11·iMM,
PSS-23WRA
2020121 Svl
e
6/11
2
Route the power cable following the factory harness
along the vehicle's frame.
4
Mount the subwoofer level remote on the center
console next to the gear shifter and route the cable
to the passenger side seat.
Front of Vehicle
6
Attach the Negative(-) ground terminal to the
factory ground stud below the center console.
Advertisement
