Mercedes-Benz GLC Series Operator's Manual page 98

96 Seats and stowing
Push release knob 1 in the direction of the
#
arrow and pull out the head restraint.
Installing
Insert the head restraint such that the
#
notches on the bar are on the left when
viewed in the direction of travel.
Push the head restraint down until it
#
engages.
Fold the rear seat backrest back until it
#
engages.
Configuring the seat settings
Multimedia system:
© Comfort Seat Comfort
4 5 5
Adjusting the backrest contour in the lumbar
region of the seat backrest (lumbar)
Select Lumbar.
#
Select the settings Z for the desired seat.
#
Adjust the air cushions.
#
Adjusting the backrest side bolsters
Select Side Bolsters.
#
Adjust the air cushion for the desired seat.
#
Selecting the massage program for the front
seats
Multimedia system:
© Comfort Massage
4 5 5
Select Wave Massage or Pulsating
#
Start the program for the desired seat ;.
#
To set the massage intensity: switch
#
Intensity on or off .
Resetting seat settings
Multimedia system:
© Comfort Seat Comfort
4 5 5
Select ß for the desired seat.
#
Confirm the prompt.
#
Switching the seat heating on/off
& WARNING Risk of burns due to repeat‐
edly switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest
padding to become very hot.
In particular, the health of persons with limi‐
ted temperature sensitivity or a limited ability
to react to high temperatures may be affec‐
Massage.
ted or they may even suffer burn-like injuries.
Do not repeatedly switch on the seat
#
High
heating.
To protect against overheating, the seat heating
may be temporarily deactivated after it is
switched on repeatedly.
* NOTE Damage to the seats caused by
objects or documents when the seat
heating is switched on
When the seat heating is switched on, over‐
heating may occur due to objects or docu‐