Mercedes-Benz GLC Series Operator's Manual page 130

128 Light and visibility
4 ° Continuous wiping, slow
5 ¯ Continuous wiping, fast
Turn the combination switch to the corre‐
#
sponding position 1 - 5.
Single wipe/washing: push the button on
#
the combination switch in the direction of
arrow 1.
í Single wipe
R
î Wipes with washer fluid
R
Switching the rear window wiper on/off
1 ô Wipes with washer fluid
2 ° Switches on intermittent wiping
3 g Switches off intermittent wiping
4
ô Wipes with washer fluid
Turn è switch 1 to the correct position
#
1 - 4.
The è symbol will appear on the instru‐
ment cluster when the rear window wiper is
switched on.
Replacing the windshield wiper blades
& WARNING Risk of becoming trapped if
the windshield wipers are switched on
while wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
Always switch off the windshield wipers
#
and the ignition before changing the
wiper blades.
Moving the wiper arms into the replacement
position
Switch the ignition on and then off again
#
immediately.
Within around 15 seconds, press and hold
#
the î button on the combination switch