Mercedes-Benz GLC Series Operator's Manual page 200

198 Driving and parking
Drive at an appropriate speed if there
#
are pedestrians close to the path of
your vehicle.
System limits
Full system performance is not available for a
few seconds after switching on the ignition or
after driving off.
If Active Brake Assist is impaired or inoperative
due to a malfunction, the Ä warning lamp
appears in the multifunction display.
The system may be impaired or may not func‐
tion, particularly in the following situations:
In snow, rain, fog, heavy spray, if there is
R
glare, in direct sunlight or in greatly varying
ambient light.
If the sensors are dirty, fogged up, damaged
R
or covered.
If the sensors are impaired due to interfer‐
R
ence from other radar sources, e.g. strong
radar reflections in parking garages.
If a loss of tire pressure or a faulty tire has
R
been detected and displayed.
If DSR is active.
R
In complex traffic situations where objects
R
cannot always be clearly identified.
If pedestrians or vehicles move quickly into
R
the sensor detection range.
If pedestrians are hidden by other objects.
R
If the typical outline of a pedestrian cannot
R
be distinguished from the background.
If a pedestrian is not detected as such, e.g.
R
due to special clothing or other objects.
If the driver's seat belt is not fastened.
R
On curves with a tight radius.
R
% The Active Brake Assist sensors adjust auto‐
matically while a certain distance is being
driven after the vehicle has been delivered.
Active Brake Assist is unavailable or only
partially available during the teach-in proc‐
ess.
Activating/deactivating Active Brake Assist
Requirements:
The ignition is switched on.
R
Multimedia system:
© Settings Assistance
4 5 5
Active Brake Assist
5
Select the desired setting.
#
The setting is retained when the drive system
is next started.
Deactivating Active Brake Assist
% It is recommended that you always leave
Active Brake Assist activated.
Select Off.
#
The distance warning function, the autono‐
mous braking function and the Evasive Steer‐
ing Assist are deactivated.
When the vehicle is next started, the middle
setting is automatically selected.
% If Active Brake Assist is deactivated, the
æ symbol appears in the status bar of the
multifunction display.