Mercedes-Benz GLC Series Operator's Manual page 102

100 Seats and stowing
If there is a risk of becoming trapped by the
steering wheel:
Move the adjustment lever of the steer‐
#
ing wheel.
The adjustment process will be stop‐
ped.
If there is a risk of becoming trapped by the
driver's seat:
Press the seat adjustment switch.
#
The adjustment process will be stop‐
ped.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take
#
the SmartKey with you and lock the
vehicle.
Vehicles with memory function: You can stop
the adjustment process by pressing one of the
memory function position switches.
& WARNING Risk of becoming trapped if
children activate the easy entry and exit
feature‑
Children could become trapped if they acti‐
vate the easy entry‑ and exit feature, particu‐
larly when unattended.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take
#
the SmartKey with you and lock the
vehicle.
If the easy entry and exit feature is active, the
steering wheel will move upwards and the driv‐
er's seat will move back in the following situa‐
tions:
You switch the ignition off with the driver's
R
door open
You open the driver's door with the ignition
R
switched off
% The steering wheel will then move upwards
only if it is not already as high as it will go.
The driver's seat will then move backwards
only if it is not already at the rear of the seat
adjustment range.
The steering wheel and the driver's seat will
move back to the last drive position in the fol‐
lowing cases:
You switch the power supply or the ignition
R
on when the driver's door is closed
You close the driver's door with the ignition
R
switched on
The last drive position will be saved when:
You switch the ignition off.
R
Vehicles with memory function: You call
R
up the seat settings via the memory function.
Vehicles with memory function: You save
R
the seat settings via the memory function.
Vehicles with memory function: Press one of
the memory function memory position switches
to stop the adjustment process.