1
Make sure any external devices (such as the AC adapter, if
you plan to use AC power rather than battery power) are
properly connected and ready.
2
Check to ensure that any attached floppy drives are
empty.
3
Press and hold the power button in until the on/off light
on the system indicator panel glows green—about one
second.
Turning on the power
4
The preinstalled operating system will load
automatically.
Setting up your software
The first time you turn on your computer, the Setup Wizard
guides you through steps to set up your software.
1
From the welcome screen, click Next to enter the Setup
Wizard.
2
Confirm acceptance of Microsoft's End User License
Agreement and click Next.
When you turn on the computer for the first time, do not turn
off the power again until the operating system has loaded
completely.
Getting Started
Setting up your software
47