Directing The Display Output When You Turn On The Computer - Toshiba TE2300 User Manual

52
Connecting Other External Devices
2 Connect the other end of the video port adapter cable to
the video-out port on the left side of the computer.
3 Connect the external device's power cable to a live
electrical outlet.
4 Turn on the external video device.
5 Set the display mode by pressing
Display Properties settings. For more information, see
"Directing the display output when you turn on the
computer" on page
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor's video cable to the RGB port on the
back of the computer.
2 Connect the device's power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing
Display Properties settings. For more information, see
"Directing the display output when you turn on the
computer" below.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 Press
2 While holding down
setting you want is highlighted.
and simultaneously.
Fn F5
Fn + F5
52.
Fn + F5
, press repeatedly until the
Fn F5
, or by setting the
, or by setting the
+
Fn F5
):