Table of Contents
Advertisement
Connecting a USB mouse
To connect a USB mouse, connect the mouse cable to the
USB port on the computer. Once connected, the mouse is
ready to use.
Connecting a PS/2 mouse
If you are connecting a mouse after you have started using the
computer, begin at step 1. Otherwise proceed to step 2.
1
Click Start, Turn Off Computer, then select Turn Off.
The operating system shuts off the computer.
2
Attach the PS/2 mouse cable to the PS/2 port on the
computer.
3
Refer to your mouse documentation for configuration
information.
To use both the PS/2 mouse and the AccuPoint II, set this up
when you have loaded the operating system.
Make sure the computer is off before you attach the mouse.
Connecting a PS/2 mouse with the computer's power on can
damage the mouse, the computer, or both.
HINT: Using an optional Y-cable allows you to connect a
PS/2 mouse and a PS/2 keyboard to the PS/2 port
simultaneously.
Expansion Options
Using a mouse
147
Advertisement
Table of Contents
