Using Pc Cards; Hot Swapping - Toshiba S2 User Manual

S2 user's guide
Hide thumbs Also See for S2:
Table of Contents

Advertisement

To adjust the volume:
For external speakers, use the volume controls on each
speaker.
For headphones, use the computer's volume control dial.

Using PC Cards

Your Tecra
and supports two types of PC Cards:
Type I cards—You can install one of these cards.
Type II cards—You can install one of these cards.

Hot swapping

With PC Cards, you can replace one PC Card with another
while the computer is on. This is called "hot swapping."
Hot swapping precautions
Although you can insert a PC Card at any time, remember not
to remove a card while it is in use. Otherwise, you could lose
valuable information. For example:
Do not remove a hard disk card while the system is
accessing it.
Do not remove a network card while you are connected to
a network.
Do not remove a SCSI card while any of the SCSI
devices connected to it are operating.
TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check
the package to make sure they conform to the PCMCIA 2.1
standard (or later). Other cards may work with your computer,
but are likely to be much more difficult to set up and use.
®
S2 Series computer comes with one PC Card slot
Enhancing Productivity
Using PC Cards
155

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tecra s2-163Tecra s2-257Tecra s2 series

Table of Contents