Toshiba S2 User Manual page 199

S2 user's guide
Hide thumbs Also See for S2:
Table of Contents

Advertisement

as it works. These channels of communication are commonly
referred to as system resources.
Interrupt Request Channel
The channel to the CPU is called an Interrupt Request (IRQ)
because it interrupts what the processor is doing and requests
some of the processor's time.
Direct Memory Access
Similarly, the data required by the device is stored in a
specific place or address in memory called the Direct
Memory Access (DMA). The DMA provides a dedicated
channel for adapter cards to bypass the microprocessor and
access memory directly. If two or more devices use the same
DMA, the data required by one device overwrites the data
required by the other, causing a hardware conflict.
Resolving conflicts
There are several things you can do to resolve hardware
conflicts:
Get the most recent drivers from the manufacturer.
Disable the device.
For an older device, remove it from the computer.
Disable another system component and use its resources
for the new device, see "Fixing a problem with Device
Manager" below.
Reconfigure the device so that its requirements do not
conflict. Refer to the device's documentation for
instructions about changing settings on the device.
If Something Goes Wrong
Resolving a hardware conflict
199

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tecra s2-163Tecra s2-257Tecra s2 series

Table of Contents