Using The Instant Password - Toshiba S2 User Manual

The computer shuts down and turns itself off.
2 Hold down the
button in until the on/off light on the system indicator
panel turns on (green)—about one second. When you
receive the following message: Press F1 to continue,"
press
System Setup displays a setup screen.
3 Press
4 Press
The Set User Password window appears.
5 Type the password in the Enter Old User Password text
box, then press
6 Do not enter a password in the Enter New User Password
text box. Instead, press
7 Do not enter a password in the Verify New User
Password text box. Instead, press
box.
8 Click
9 Press "x" to select Exit.
10 Press "x" to select Save and Exit.
11 Click

Using the instant password

An instant password secures your system with a single
keystroke. Use this feature when you need to leave your desk
for a few minutes and do not want to turn off the computer.
HINT: Run System Setup outside Windows, at a system
prompt. If you try to run System Setup from an MS-DOS
session under Windows, results can be unpredictable.
Esc
F1.
to select Startup.
S
to select Set User Password.
U
Enter
to save your change.
OK
to save and exit System Setup.
OK
Toshiba Utilities
User-level passwords
key and press and hold the power
.
to skip this text box.
Enter
to skip this text
Enter
179