Your Computer's Tft Display; Inserting And Removing Pc Cards - Toshiba Tecra S1 Series Resource Manual

Removing a memory module
If you need to remove a memory module:
1 Complete steps 1 through 4 in ""Installing additional
memory (optional)" on page 27" to shut down the
computer and expose the memory module(s).
2 Pull the clips away from the memory module.
3 The memory module pops partially out of the slot.
Removing the memory module
4 Carefully remove the module from the slot.
5 Replace the cover plate and the screws.
6 Turn the computer over and restart it.

Your computer's TFT display

Small bright dots may appear on your TFT display when you
turn on your computer. Your display contains an extremely
large number of thin-film transistors (TFT) and is
manufactured using high-precision technology. Any small
bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology.

Inserting and Removing PC Cards

Your Tecra
Card slots and supports three types of PC Cards:
❖
Type I cards—You can install up to two of these cards,
one in each slot.
If you use the computer for a long time, the memory modules will
become hot. If this happens, let the modules cool to room
temperature before you replace them.
®
S1 Series computer comes with two stacked PC
Your computer's TFT display
29