Toshiba S2 User Manual page 171

Sample HW Setup
Toshiba HW Setup has the following tabs:
❖
General — Shows the BIOS version
❖
Password — Allows you to set the user password and an
owner string
❖
Parallel/Printer — Allows you to configure the parallel
port default settings
❖
Display — Allows you to change various default settings
for the built-in LCD display
When the computer restarts, it remembers the last
NOTE
configuration. If data does not appear on the display you are
using after starting in Standby Mode, press
❖
CPU — Allows you to enable or disable accessing the
processor's serial number
Dynamically Switchable—This mode is the default setting
for your computer, and automatically changes the processing
Toshiba Utilities
Toshiba HW Setup
Fn
171
+ .
F5