Toshiba S2 User Manual page 111

will go into Hibernation mode when you press the
power button.
❖
When I close the lid
Set this option to Hibernate so that the computer
will go into Hibernation mode when you close the
display panel.
5 Click Apply.
6 Click OK.
The computer is now set to automatically go into
Hibernation when your option settings occur.
For more information about the Power Saver utility, see
NOTE
"Power Saver" on page
Once the computer is configured, put the computer into
Hibernation mode by either pressing the power button or
closing the display panel, depending on the hibernation
options taken.
Starting again from Hibernation mode
Use these instructions to restart the computer when you enter
Standby mode by closing the display panel:
❖
When using AC power, open the display panel.
❖
When using battery power, open the display panel and
press the power button until the on/off light changes to
green.
The computer returns to the screen you were previously
using.
Learning the Basics
Powering down the computer
187.
111