Using A Mouse With The Advanced Port Replicator; Connecting A Mouse To The Advanced Port Replicator - Toshiba 4010 User Manual

Using a mouse with the Advanced Port Replicator

See "Toshiba Hardware Setup" on page 185
information.
NOTE: The Fn emulation key is not supported when using a USB
keyboard.
Using a mouse with the Advanced Port
Replicator
If you prefer to use a mouse, you can attach one to a PS/2
port, serial port, or USB port on the optional Advanced Port
Replicator, provided the mouse is PS/2- ,serial- , or USB-
compatible.
A PS/2-compatible mouse allows you to have the AccuPoint
II active at the same time.
CAUTION: When connecting any PS/2 or serial device, turn off
your computer to prevent any possible hardware damage.

Connecting a mouse to the Advanced Port Replicator

To connect the USB, PS/2, or serial mouse to the optional
Advanced Port Replicator, gently push the mouse cable into
the USB, PS/2 or serial port.
NOTE: If you connect a PS/2 mouse to the Advanced Port
Replicator while it is in Standby or Hibernation mode, you will not
be able to use the mouse when you turn on the computer.
If you connect a PS/2 mouse to the optional Advance Port
Replicator, the mouse cursor may move irregularly after hot-
Expansion Options
for more
107