Adjusting The Quality Of The External Display; Display Limitations - Toshiba 4010 User Manual

110
Expansion Options
Using external display devices
2 While holding down
setting you want takes effect.
This hot key cycles through the settings in the following
order:
❖
❖
❖
3 Release the
TECHNICAL NOTE: You can also change these settings using the
Display Properties Box.

Adjusting the quality of the external display

To obtain the best picture quality from your external display
device, you may need to adjust the video settings. See the
documentation supplied with the device for additional
configuration steps.
TECHNICAL NOTE: In order to use the simultaneous mode, you
must set the resolution of the internal display panel to match the
resolution of the external display device. The external display
device must support a resolution of 640 X 480 or higher.

Display limitations

Keep in mind that the quality of the display will be limited to
the capabilities of the external video device.
❖
If the external video device, such as an SVGA monitor, is
capable of displaying at a maximum resolution of 640 x
480 and your system is set for a higher resolution, only
Built-in display panel only
Built-in display panel and external monitor
simultaneously
External monitor only
key.
Fn
, press repeatedly until the
Fn F5