Keyboard Problems; Accupoint Ii Problems - Toshiba 4010 User Manual

210
If Something Goes Wrong
Resolving a hardware conflict

Keyboard problems

If, when you type, strange things happen or nothing happens,
the problem may be related to the keyboard itself.
The keyboard produces unexpected characters.
A keypad overlay may be on. If the numlock light or cursor
control mode light is on, press
turn off the cursor control mode light or
simultaneously to turn off the numlock light.
If the problem occurs when both the keypad overlays are off,
make sure the software you are using is not remapping the
keyboard. Refer to the software documentation and check
that the program does not assign different meanings to any of
the keys.
You've connected an external keyboard and the
operating system displays one or more keyboard error
messages.
The keyboard you connected may be defective or
incompatible with the computer. Try using a different make
of keyboard.
Nothing happens when you press the keys on the
external keyboard.
You may have plugged the external PS/2 keyboard in while
the computer was turned on. Click Start, Shut Down or
Turn off computer, and Restart the computer using the
AccuPoint II on the internal keyboard. The computer will
restart and recognize the device.

AccuPoint II problems

Some of the keyboard problems already listed may affect the
AccuPoint II. In addition:
Your finger slides off the AccuPoint II easily.
If the AccuPoint II cap is oily, remove the cap and clean it
with a cotton swab dipped in rubbing alcohol.
and simultaneously to
Fn F10
and
Fn F11