Selecting Wireless Network Settings From The Control Panel - Epson EcoTank M2120 User Manual

Selecting Wireless Network Settings from the Control Panel

You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software. The installer program guides you through network setup.
Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not
responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your network data and settings.
1. Press the
2. Press the arrow buttons to select Wi-Fi Setup and press the OK button.
You see a screen like this:
3. Select Wi-Fi (Recommended) and press the OK button twice.
4. Select Wi-Fi Setup Wizard and press the OK button.
5. Press the arrow buttons to select the name of your wireless network and press the OK button. If you
do not see your wireless network's name, you can enter it manually.
Note: To enter the wireless network name manually, select Other SSIDs and press the OK button.
Enter your network name as described in the next step.
home button, if necessary.
32