Sharp XE-A213 Instruction Manual page 22

8. VAT/tax4 status programming (Press
(1) Go to (2) when the VAT/tax 4 status does not need
to be changed from "TAX4 NO". Otherwise, press
key to display "TAX4 YES".
Each time
"TAX4 YES" and "TAX4 NO" alternatively.
Default setting is "NO".
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
9. Registration type programming (Press
(1) Go to (2) when the registration type does not need
to be changed from "NORMAL". Otherwise, press
key to display "SICS".
Each time
"SICS" and "NORMAL" alternatively.
Choose "SICS" for single item cash sale and
"NORMAL" for normal sale.
Default setting is "NORMAL".
If an entry of a department programmed for SICS is
made first, the sale will be finalized as a cash sale
as soon as the department key is pressed. If the
entry is made after entering a department not
programmed for SICS, the sale will not be finalized
until the key is pressed.
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
10. Sign programming (Press
(1) Go to (2) when the sign does not need to be
changed from "(+)". Otherwise, press
display "(-)".
Each time
"(-)" and "(+)" alternatively.
Choose "(+)" for positive department and "(-)" for
negative department.
Default setting is "(+)" for dept. code 1 to 20 and 22
to 99, and "(-)" for dept. code 21.
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
20
key is pressed, the display shows
key to register the setting.
key is pressed, the display shows
key to register the setting.
to skip. / Press
key is pressed, the display shows
key to register the setting.
to skip. / Press
to skip. / Press
to terminate.)
key to
to terminate.)
REGIST.TYPE
to terminate.)
SIGN
LIMIT DIGITS
NORMAL
(+)
8