Prepare The Site - Kohler Eir Comfort Height K-77795-0 Installation Manual

4. Prepare the Site

CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately, temporarily
place a rag in the closet flange.
NOTE: If the rough-in distance is less than 12" (305 mm) the seat may strike the wall when it is opened.
Confirm that the rough-in is 12" (305 mm) before installing the toilet.
Remove the old toilet.
Remove the wax residue from the flange.
NOTE: Do not install the wax ring at this time.
Install two 5/16" diameter x 2-1/4" long T-bolts into the floor flange.
Set the adapter in place over the flange as shown.
Mark the adapter rear mounting hole.
Kohler Co. 7 1295780-2-A